| ¡@ |
 |
Gasket Plate Heat Exchanger |
|
| ¡@ |
| ¡@ |
| Exclusive Free-Flow Design |
Competitive plate heat exchanger designs claim wide-gap
advantages,
but pinch points in their design can block flow
and create slurry buildup.
The Free-Flow's channels handle
bigger particles and require less
maintenancebecause they
are of a constant width. |
| ¡@ |
| ¡@ |
| ¡@ |
| ¡@ |
| ¡@ |
| ¡@ |
| FREE-FLOW PLATES |
 |
| ¡@ |
| ¡@ |
| Specifications |
| PLATE HEAT EXCHANGER |
| MODEL |
HEIGHT(mm) |
WIDTH(mm) |
TYPICAL LENGTH(mm) |
STANDARD CONNECTION SIZE(in.) |
AT4
|
660
|
186 |
305¡ã501 |
1(in.) |
AT10
|
924 |
279 |
368¡ã 1283 |
2(in.) |
AT20
|
1340 |
441 |
508¡ã4048 |
3(in.) |
AT402
|
937 |
533 |
521¡ã4051 |
4(in.) |
AT405
|
1426 |
533 |
521¡ã4061 |
4(in.) |
AT40
|
1794 |
533 |
860¡ã4061 |
4(in.) |
AT805
|
1603 |
749 |
879¡ã4080 |
6(in.) |
AT80
|
2289 |
749 |
879¡ã4080 |
6(in.) |
AT1306
|
2161 |
941 |
1289¡ã4489 |
10(in.) |
AT1309
|
2527 |
941 |
1289¡ã4489 |
10(in.) |
AT130
|
2721 |
941 |
1289¡ã4489 |
10(in.) |
AT180
|
3220 |
1372 |
1880¡ã4166 |
14(in.) |
AT2508
|
3048 |
1448 |
1651¡ã6223 |
16(in.) |
AT250
|
3404 |
1448 |
1651¡ã6223 |
16(in.) |
AT161FF
|
1807 |
610 |
854¡ã4061 |
3(in.) |
AT40FF
|
1784 |
686 |
860¡ã4061 |
4(in.) |
AT184FF
|
2162 |
749 |
879¡ã4080 |
8(in.) |
| AT192FF |
2839 |
1307 |
1289¡ã4489 |
12(in.) |
|
| Based on selection: Design pressure up to 350 psi(24.6kg/cm2) (full differential pressure rating).
Design temperature up to 410¢K ( 210¢J). ASME code standard available. |
| ¡@ |
| ¡@ |
| FREE-FLOW CONNECTIONS AND PRESSURES |
| MODEL |
STUDDED PORT SIZE*(in.) |
OPERATING PRESSURES+ |
AT161FF
|
3 |
up to 86 psig
(6.9 bar)(6kg/cm2) |
AT40FF
|
4 |
up to 150 psig
(11.3 bar)(10.5kg/cm2) |
AT184FF
|
8 |
up to 86 psig
(6.9 bar)(6kg/cm2) |
| AT192FF |
12 |
up to 86 psig
(6.9 bar)(6kg/cm2) |
|
| MATERIALS OF CONSTRUCTION |
| PLATES |
GASKETS |
T304 stainless steel
|
Nitrile (NBR) |
| T316 stainless steel |
Ethylene Propylene Rubber (EPDM) |
| Titanium |
Silicone |
| Avesta SMO 254 |
Viton |
| Hastelloy |
Butyl (Resin Cured) |
| Nickel |
Hypalon |
| Incoloy |
¡@ |
|
|
| * Standard studded port-type connections provide maximum cost effectiveness and are available from stock.
Lap joint and weld-neck flanged connections are available at additional cost with longer delivery.
+ Temperatures up to 300¢K(148.90¢J) are available on all models. |
| ¡@ |
| TOP |
Applications
